What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 01:43
He then asserts :
I post the exact comment here.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Can I fix a fridge leak myself, or should I call a pro?
He then describes Rainy Season and Lightning.
but this device (an Inductor) … impedes the rapid changes in the current.
The other is “what does a “fuse” do?”
One
It seems Mohan does not understand the difference between a comment and an Answer.
In schematic diagrams this is the symbol for a fuse:
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The third is lightning and “how it gets conducted into a home.”
Have you ever dealt with a Christian narcissist?
The MOV will conduct when the voltage exceeds 50% of line voltage.
A circuit breaker is similar, but is resettable.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
How did you as a human being change while growing up?
First Sentence:
But it can get overloaded, and no longer works.
This one hit behind the barn.
What's your favorite stupid joke?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
[image of Common-mode choke]
What do you respect the most about Elon Musk?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is where the MOV conducts again, and dissipated the energy.
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Edit 2024–10.
Is the Chinese economy currently collapsing? If not, what could potentially cause it to collapse?
The bolt then partially travels down the line to your home.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Now when you have a certain ac resistance, then a current flows in a loop.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There are three different concepts here that are getting confused.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
A fuse is a non-resetable over current circuit protector.
Here is a simplified AC power diagram.
Is visiting holy shrines (dargahs) or graves haraam in Islam?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Barnstars:
Upvotes:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–10[John johnson John Johnson ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What does a fuse do?
(Dc diagram shown, AC is similar).
But… the neutral is now “floating” because of the 1 ohm resistance.
So, the voltage could go up to 500 volts, and the fuse will not open up.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
An AC voltage/ current source, and an ac inductive load.
What is lightning?
These devices are installed between the “hot” and “neutral” and protective ground.
There are two important concepts here.
a photo is worth a thousand words.
what exactly is a ‘surge’ protector?
[old diagram got deleted by accident]
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
At one ohm, the resistor has a maximum of 1 watt power.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
eight
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This device then solves the entire problem.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then describes the function of a fuse.
One is “what exactly is in a ‘surge protector’ ? ”
so, what happens?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
the problem then depends on "how fast does the fuse operate?".
At least they know the answer if they wanted it.
It also is a device that limits the change in current flow.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
These are simplified answers to the original question, and does not change anything I wrote above.
but I think this circuit , shows a few more pieces.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Can the fuse protect the electronic devices from lightning instead of a surge protector.